Skip to main content

Fire alarm inspection and servicing certificate (BS 5839-1)

Record a periodic fire alarm service: system category and panel, the servicing checks, every device tested, defects and variations, and the next service date. Sign it on screen and download a tidy PDF for the responsible person.

Fire safety law in England and Wales requires the responsible person to keep fire detection and alarm systems maintained in efficient working order, but sets no fixed interval. BS 5839-1 recommends a competent person services the system at least every six months. Record each visit on a certificate and the weekly test in the log book.

Last reviewed · sources linked or named in the table

🔒 Filled in and turned into a PDF in your browser. Nothing you type is uploaded unless you press “Save to account”; otherwise a draft stays only on this device.

Premises and client

System

Visit

Inspection and servicing checks

Log book reviewed; false alarms and faults since the last visit acted on
Visual check for building or occupancy changes that affect the system
Control and indicating equipment: indications, fault warnings and controls work
Standby batteries and charger checked and tested
Manual call points tested as recorded below
Automatic detectors functionally tested as recorded below
Sounders and visual alarm devices operate correctly
Alarm and fault signals to the receiving centre tested
Interfaces (door holders, plant shutdown, lifts) tested; cause and effect correct
Visible cables and fixings in good condition
Zone plan displayed and correct

Devices tested

One row per device or per zone tested on this visit.

Defects, variations and recommendations

Engineer

Engineer signature

Optional. Draw above or pick a PNG/JPG; it stays on your device.

Free PDFs carry a small “Free version” mark. Pro removes it, saves your certificates, adds your logo and company details and reminds you before renewals.

Important: this tool records the results and findings you enter and formats them as a document. It does not inspect, test or assess anything. Competence and compliance remain with the user. Not legal advice.

What the certificate records

  • Premises, client and certificate number.
  • System category (L1 to L5, M, P1, P2), panel make and location, zones and whether an alarm receiving centre monitors it.
  • The servicing checks: log book, building changes, control panel, batteries and charger, call points, detectors, sounders and visual alarms, remote signalling, interfaces and cause and effect.
  • A schedule of the devices tested on this visit, with results.
  • Defects found, variations from BS 5839-1 and work recommended.
  • Engineer, accreditation, date of visit, next service date and signature.

How often should a fire alarm be serviced?

BS 5839-1 recommends that a competent person inspects and services the system at intervals of no more than six months, so that over the year every device is tested. The weekly user test is separate and goes in the fire alarm log book.

Your fire risk assessment and the system documentation say what applies to your premises. The certificate only records the visit; competence and compliance remain with the engineer and the responsible person.

Which fire alarm records to keep, and how often

The weekly test, the fault log and the servicing certificate are three different records. Keeping them together makes it easy to show an enforcing authority, an insurer or a landlord that the system is maintained.

A record-keeping summary for a typical non-domestic premises in England and Wales. Your fire risk assessment and the system documentation decide what applies to you.
RecordTypical frequencyWho does itWhere it is recorded
Weekly user test of one manual call point, rotating the point testedWeeklyA trained member of staff or the caretakerFire alarm log book
Faults, false alarms, disablements and building changesAs they happenResponsible person or their delegateFire alarm log book
Periodic inspection and service of the whole system, with a share of devices tested each visitEvery six months is the BS 5839-1 recommendationCompetent alarm engineerThis certificate, plus the devices table
Annual review of the system and the log bookAt least yearly, and after any alterationResponsible person with the engineerFire risk assessment and log book

What the law says, and where the standard fits in

The Regulatory Reform (Fire Safety) Order 2005 (England and Wales) requires the responsible person for non-domestic premises, and for the common parts of multi-occupied homes, to provide appropriate fire detection and warning (article 13) and to keep the premises, equipment and devices in an efficient state under a suitable system of maintenance (article 17). The Order does not name a test interval or a standard.

BS 5839-1 is the code of practice most fire risk assessors and insurers use as the benchmark for how a detection and alarm system is designed, installed and maintained. Because the Order is goal-based, your fire risk assessment records which benchmark you rely on and why. GOV.UK publishes the Home Office fire safety risk assessment guides for the main types of premises and a summary of the responsible person’s duties.

Sources

  • Regulatory Reform (Fire Safety) Order 2005, articles 9, 13 and 17: legislation.gov.uk/uksi/2005/1541, read 18 November 2026.
  • Fire safety in the workplace, your responsibilities: gov.uk/workplace-fire-safety-your-responsibilities, read 18 November 2026.
  • Fire safety risk assessment: offices and shops, Home Office (updated 12 September 2023): gov.uk/government/publications/fire-safety-risk-assessment-offices-and-shops, read 18 November 2026.
  • BS 5839-1: Fire detection and fire alarm systems for buildings, code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises. Named here as a reference only; buy the standard from BSI for its requirements.

Writing certificates every week? Pro is £39/month ex VAT

  • Every certificate saved: fire alarm, emergency lighting, PAT, EIC, EICR and Minor Works
  • Your logo, company, accreditation and signature on every PDF
  • History with search, copy and re-issue
  • Renewal reminders in the app and in your calendar
  • No “Free version” mark

Business (£79/month ex VAT) adds up to 5 users, a client and site register and bulk reminders. Plans are for businesses (sole traders, partnerships and companies). The forms and calculators stay free.

See plans

Frequently asked questions

Is a fire alarm service certificate a legal requirement?

No law names a certificate. The Fire Safety Order 2005 requires the system to be maintained in efficient working order, and a dated certificate from a competent person is the usual evidence. Insurers and licensing authorities often ask for it, and your fire risk assessment may require it.

What is the difference between this certificate and the fire alarm log book?

The log book holds the weekly test, faults, false alarms and changes. The certificate records one inspection and service visit by an engineer, with every device tested and the next service date. Most premises need both.

How long should I keep fire alarm records?

No fixed period is set in the Order. Many responsible persons keep service certificates for the life of the system or at least several years, and keep the log book with the system so an inspector can see the history. Follow your insurer and your fire risk assessment.

Is this the official BS 5839 model certificate?

No. It is our own layout that covers the items BS 5839-1 expects an inspection and servicing record to show. Many maintenance companies use their own certificate; if your certification body (for example BAFE SP203-1) requires its own form, use that.

Can I list every detector and call point?

Yes. Add as many rows as you need to the devices table, with zone, location, device type and result. The PDF continues onto extra pages.

Can I keep certificates and get a reminder before the next service?

With a Pro plan you can save each certificate to your account, copy it for the next visit and get the next service date in your calendar. The form itself stays free.

Is anything I type uploaded?

Not unless you choose to save it. The form and the PDF are built by your browser on your device, and a draft is kept in your browser’s local storage so you can come back to it on the same device (“Clear form” deletes it). Only when you are signed in to a Pro or Business plan and press “Save to account” is the certificate stored on our server, so you can open it on any device.

Does using this form make my premises compliant?

No. The tool only records what you enter and lays it out as a tidy document. Whether the inspection, test or assessment is suitable and sufficient depends on the person doing it and on the premises. Competence and compliance remain with you, the user.